Chapter 14
•
To set up Daylight Saving Time:
1. Select
Enable Daylight Saving
2. Select the correct
time zone.
3. Select the correct
time zone.
4. Click Save.
14. 2. Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enter the information with the help of page tips:
1 ) Choose
Ping
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
•
Traceroute
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the
IP Address
Time.
Start
date and time when daylight saving time starts at your local
End
date and time when daylight saving time ends at your local
System Tools
> Diagnostics.
or
Traceroute
as the diagnostic tool to test the connectivity;
is used to display the route (path) your router has passed to reach
or
Domain Name
of the tested host.
Manage the Router
72