Table of Contents
Advertisement
Your LCD screen...
has a whole range of useful features and functions, e.g.:
•
TFT display (Thin Film Transistor; active matrix)
•
minimal space requirements thanks to slim casing
•
optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the corners)
•
high degree of brightness and good contrast
•
maximum resolution of 1920 x 1080
•
presentation of up to 16.7 million colours (in conjunction with an appropriate display adapter)
•
automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 48 to 76 Hz (absolutely flicker-free)
•
digital screen controller with microprocessor for storing 31 different display modes
•
freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
•
convenient operation via integrated OSD (On-Screen-display) menu
•
VESA-DDC compatibility
•
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device for swivel arm or similar accessory
•
Plug&Play capability
•
power management for reducing power consumption when the computer is not in use
•
Compliance with the recommendations according to TCO 6.0 and TCO Edge
the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
•
This operating manual contains important information you require to start up and run your LCD monitor.
A display adapter (graphics card) with VGA interface or a digital display adapter with DVI interface
or video signal source with DisplayPort interface is required to control the LCD monitor. The monitor
processes the data supplied to it by the display adapter. The display adapter or the associated
driver software is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in accordance with your
needs (see chapter
Target group
You don't need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this manual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu
"Changing the monitor settings", Page
Your LCD screen...
26).
5
Advertisement
Table of Contents
