Adjusting The Brightness And Contrast; Selecting The Application Mode - Fujitsu P24T-7 LED Operating Manual

Operation

Adjusting the brightness and contrast

Brightness
Contrast
Black level
ACR
Auto Brightness
Auto level
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.

Selecting the application mode

D mode
sRGB
Office
Photo
Video
32
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you change the brightness of the background lighting.
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Enable/disable dynamic contrast
This function improves the contrast by automatically controlling the
background lighting in relation to the image being displayed.
This setting can only be configured in Video application mode.
Automatic brightness control
This function is used to automatically control the brightness of the
background lighting using the ambient light sensor.
This setting can only be configured in devices with an ambient light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted manually by the user
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed using
Call up the Mode setting window
DICOM simulation settings (the settings for Color and ACR are locked:
Color = 7500K, ACR = off)
Predefined settings for sRGB (reduced brightness)
Office settings (the settings for Color and sharpness can be adjusted)
Predefined settings for Photo (Color, Sharpness, Saturation)
Predefined settings for Video (Colour, Sharpness, ACR)
.
Fujitsu