Table of Contents
Advertisement
Having this problem?
Picture is shaking
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances (horizontal lines, picture
noise)
The screen becomes darker
Screen display suddenly becomes darker during
operation and then suddenly goes black after a
certain amount of time.
Fujitsu
Check the following points:
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press the
AUTO
auto-adjustment of the screen.
► Run the Factory Recall function in the OSD
menu.
The Auto Processing message appears.
► Press the
AUTO
auto-adjustment of the screen.
► Press the
AUTO
auto-adjustment of the screen.
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
► Reset your distance to the display using the
Proximity setting in the OSD menu.
► Increase the setting until the setting bar
projects over the detected distance.
Troubleshooting
button to conduct the
button to conduct the
button to conduct the
37
Advertisement
Table of Contents
