Wired Network - Kyocera 1102TV3NL1 Operation Manual

Setup and Registration (System Menu) > System Menu
TCP/IP (IPv6)
Item
TCP/IP (IPv6)
RA(Stateless)
DHCPv6
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Restart Network
Item
Restart Network

Wired Network

[Menu] key > [▲] [▼] key > [Wired Network] > [►] key
Configure wired network settings.
Item
TCP/IP
TCP/IP (IPv6)
LAN Interface
Restart Network
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Select whether to use TCP/IP (IPv6).
Value: Off, On
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [TCP/IP (IPv6)] is set to [On].
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [TCP/IP (IPv6)] is set to [On].
Restarts the network.
For details on setting value.
TCP/IP (page 7-12)
For details on setting value.
TCP/IP (IPv6) (page 7-13)
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
Restarts the network.
7-13
Description
Description
Description