Charging The Battery - Sharp GX293 Manual

Charging the Battery

You must charge the battery for at least 2 hours before using
your phone for the first time.
Using the Charger
1.
Remove the cover of the external connector, and
connect the charger to the external socket located at the
bottom of the phone by pressing both sides indicated
with arrows. Connect the charger to an AC outlet. Keep
the cover in a safe place so as not to lose it.
When the phone is charging, the animated battery status
icon ( ) in the upper right of the screen displays the
current status.
Standard charging time: Approx. 2 hours.
Note
• Charging time may vary depending on the state of the battery
and other conditions (See "Battery" on page 124).
To Disconnect the Charger
Long press the side buttons of the charger, then disconnect the
charger from the external socket of the phone.
2.
When charging is complete, the battery indicator icon
displays the full charge status. Unplug the charger from
the AC outlet, then unplug the charger connector from
the phone. Put the cover back.
Note
• Do not use any non approved charger, this may damage your
phone and invalidate any warranty (See "Battery" on
page 124 for details).
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right hand
side of the main display and in the external display.
Getting Started 13