Sharp GX293 Manual page 32

2. Press J for the vowel of the first letter, then highlight
"li".
Characters with the same reading are displayed in the
Candidate field.
3.
Select the desired character.
4.
Long press corresponding numeric key to enter the
desired character (in this case, H).
32 Entering Characters
Tip
• If a character contains two vowels (such as "ie"), enter the
second vowel after entering the first vowel. For example,
enter K, J and I to display "lie".
• When the cursor is placed after the first character, the
Candidate field displays characters most likely to follow.
• If you want to use tone options, long
press P instead of step 3 to
display the desired character.
The tone symbols are displayed in
the Candidate field.
Press the corresponding numeric
key (H).