Table of Contents
Advertisement
Profiles
(M 7)
Tone sound and vibration set can be customised for each
profile according to your environment.
There are 6 profiles including one user definable profile:
Normal, Meeting, Activity, Car, Headset and Silent.
Activating a Profile
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding icon described
below is displayed on the stand-by screen.
Normal:
Is the default setup (not displayed in the
stand-by screen).
Meeting:
For use when discretion needed.
Activity:
For use in busy environments.
Car:
For use in the car (connected to a
handsfree car kit).
Headset:
For use with a headset.
Silent:
For use when silence is needed. All
sounds (except the camera shutter
sound) are muted and you are alerted to
calls with the vibrator.
Tip
• Long press R to launch the Profiles screen during
stand-by.
Customising Profiles
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select the setting you wish to customise and change as
desired.
For details about settings, see pages 92 to 96.
4.
Press [Save] when finished.
Resetting Profile Settings
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 116.
Profiles
91
Advertisement
Table of Contents
