Charging The Battery - Sharp SH9010C User Manual

Charging the Battery

You must charge the battery for at least 150 minutes before
using your phone for the first time.
Using the Charger
1.
Open the cover of the external connector, and connect
the charger horizontally to the external socket located at
the bottom of the phone until it clicks.
2.
Connect the charger to an AC outlet.
When the phone is charging, the battery status icon ( )
displays the current status. The Small Light also lights up.
Standard charging time: Approx. 150 minutes
Note
• Charging time may vary depending on the state of the battery
and other conditions. (See "Battery" on page 116.)
14 Getting Started
To Disconnect the Charger
When charging is completed, the battery indicator icon displays
the full charge status. The Small Light also turns off when
completed.
1.
Unplug the charger from the AC outlet.
2.
Push and hold the side buttons of the charger
disconnect the charger from the external socket of the
phone .
3.
Close the cover.
Note
• Do not use any non-approved chargers as they may damage
your phone and invalidate any warranties, see "Battery" on
page 156 for details.
• Forcibly disconnecting the charger may cause malfunction.
, then