Charging The Battery - Sharp AQUOS V User Manual

1.4 Charging the Battery

The battery that came with the device is only partially charged.
Charge the battery
1. Connect one end of the USB cable to the USB
port of the device.
2. Connect the other end of the USB cable to the
Charger.
3. Plug the Charger to a wall outlet to start
charging.
When the battery is charging and the device is turned on, the
the status bar. When the battery is fully charged, the
bar.
Warning
• Please use indoors and in dry places.
• Overheat protection mechanism is activated, the device will temporarily stop
charging:
When the system temperature reaches the maximum operating temperature, the
device will automatically activate the overheat protection mechanism and
temporarily stops battery charging. When the system temperature drops, the
system will automatically restart the battery charging.
NOTE: Battery life varies depending on network, applications, and ambient
temperature.
Chapter 1: Getting Started
icon is displayed on the status
6
icon is displayed on