Replace Malfunctioning Psu - Synology FlashStation FS2017 Hardware Installation Manual

Table of Contents

4 Find the malfunctioning fan. Lift the fan upward to remove it.

5 Prepare a new fan, and slide it into the FlashStation. Make sure the fan is aligned properly as illustrated

below.

Replace Malfunctioning PSU

If a PSU or its fan malfunctions, please see the instructions below to replace the malfunctioning PSU.

1 Unplug the power cord from the PSU to be replaced.

Note:

By pressing the Beep Off button, you can silence the long beeping sound when you hear it.

2 Push the lever of the PSU at the back panel in the indicated direction.

3 Pull out the PSU from the FlashStation.

4 Prepare a new PSU, and push it back into the slot until you hear a click.

14 Chapter 2: Hardware Setup

Table of Contents