Table of Contents
Advertisement
Replace a Malfunctioning Fan
Your Synology RackStation comes equipped with multiple cooling fans. In the event of a fan malfunction, your
RackStation will emit a beeping sound. This section will guide you through the steps necessary to replace a
malfunctioning fan.
To replace a malfunctioning fan, please follow the instructions below:
1 Follow steps 1 to 2 of "Install a RAM Module" on Page 9 to remove the cover from your RackStation. Fans are
numbered as follows:
2 Find the malfunctioning fan. Lift the fan upward to remove.
3 Apply firm pressure to the power plug and slide it off the power port as shown below.
13 Chapter 2: Hardware Setup
Advertisement
Table of Contents
