Table of Contents
Advertisement
Install DSM on FlashStation
After hardware setup is finished, please install DiskStation Manager (DSM) – Synology's browser-based
operating system – on your FlashStation.
Install DSM with Web Assistant
Your FlashStation comes with a built-in tool called
DSM from the Internet and install it on your FlashStation. To use Web Assistant, please follow the steps below.
1 Power on the FlashStation.
2 Open a web browser on a computer connected to the same network as the FlashStation.
3 Enter either of the following into the address bar of your browser:
a
find.synology.com
b
flashstation:5000
4 Web Assistant will be launched in your web browser. It will search for and find the FlashStation within the local
network. The status of the FlashStation should be
5 Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The FlashStation must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the FlashStation and the computer must be in the same local network.
6 If you accidentally leave the installation process before it is finished, login to the DSM as admin (default
administrative account name) with the password left blank.
Learn More
Congratulations! Your FlashStation is now ready for action. For more information or online resources about your
FlashStation, please visit www.synology.com.
15
Web Assistant
that helps you download the latest version of
Not
installed.
3
Chapter
Advertisement
Table of Contents
