Bluetooth
Remote voice control
Activate remote voice control
1. Press VOICE on the handset or
telephone base.
If you have connected two cell
f
phones to the telephone, the
telephone shows Activate
remote voice control of
1: Cell Phone X 2: Cell Phone Y
(Cell Phone X and Cell Phone Y
represent the device names of
your cell phones). Press
CELL
2.
2. The telephone then shows Activating remote
voice control....
If the activation fails, the telephone displays
f
Connection timeout. Please check cell status..
OK
Press
3. When the telephone base or handset plays the
confirmation tone as forwarded by the cell phone's voice
app, start speaking toward the telephone base or handset,
and then wait for feedback. Make reply to the voice app's
feedback, if necessary.
You can press
f
the speakerphone and listen to the feedback through
the handset earpiece.
4. To end the current remote voice control session, press
END
on the telephone base or handset. The screen shows
Remote voice control ended. briefly. You can restart by
following Steps 1-3 mentioned above.
CELL 1
and try again.
/SPEAKER on the handset to turn off
Handset
VOICE
or
35
Telephone base
1 2
Activate remote
voice control of
1: Cel l Phone X
2: Cel l Phone Y
CELL 1
CELL 2
1 2
Activating
remote voice
control...
END
1 2
Cel l Phone X
00:00:01
END