Table of Contents
Advertisement
Answering system
Message playback
When messages are playing on a handset:
/SPEAKER to play the messages through the handset earpiece.
Press
f
/SPEAKER again to return to playing messages through the
Press
speakerphone.
/VOLUME/
Press
CID
f
Press
SKIP
to skip to the next message.
f
REPEAT
Press
f
to listen to the previous message.
/DELETE to delete the current message.
Press
MUTE
f
Press 2 to pause the playback and show the caller ID information.
f
HOME/
Press
f
press
CELL 1 or
necessary, press
OFF/
Press
f
back within 10 seconds, message playback restarts.
HOME/
Press
f
The handset displays Call back? with the caller ID information. Press
to call back the caller, or
format used is not correct, then use the option, as mentioned above, to
choose the correct dialing format before calling back the caller.
Press
OFF/
f
Notes:
When the answering system has less than three minutes of recording time left, it announces, "Less than three minutes
f
to record." and the handset displays Rec mem low.
When the telephone is not in use, if the handset or telephone base displays Rec mem full, the memory is full.
f
Delete some messages to make room for more.
to adjust the message playback volume.
DIR
to repeat the message currently playing. Press
CALL
,
FLASH
CELL 2 to use the cell line to call back the caller. If
#
(pound key) or 1 to show different dialing options.
BACK
or
CANCEL
CELL 1 or
,
FLASH
BACK
to stop the playback.
CANCEL
/SPEAKER to use the home line, or
or
to restart the playback. If you do not call
CELL 2 to pause the message playback.
to restart the message playback. If the dialing
156
REPEAT
twice
CALL
Advertisement
Table of Contents
