Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 43.
3. Pivot the drive bay assembly upward. See "Pivot the drive bay assembly upward and downward" on
page 47.
4. Disconnect the power supply assembly cables from the system board.
5. Replace the power supply assembly.
Figure 51. Removing the power supply assembly
Figure 52. Installing the power supply assembly
70
User Guide