Table of Contents
Advertisement
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 43.
3. Pivot the drive bay assembly upward. See "Pivot the drive bay assembly upward and downward" on
page 47.
4. Depending on your computer model, refer to one of the following to replace the M.2 solid-state drive.
• Type 1
Figure 41. Pulling out the stopper
Figure 42. Removing the M.2 solid-state drive
.
Chapter 7
CRU replacement
65
Advertisement
Table of Contents
