Table of Contents
Advertisement
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 43.
3. Disconnect the signal cable and the power cable from the optical drive.
4. Replace the optical drive.
Figure 5. Removing the optical drive
Figure 6. Installing the optical drive
5. Connect the signal cable and the power cable to the new optical drive.
6. Reinstall the removed parts.
.
Chapter 7
CRU replacement
45
Advertisement
Table of Contents
