Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the front bezel. See "Front bezel" on page 43.
3. Pivot the drive bay assembly upward. See "Pivot the drive bay assembly upward and downward" on
page 47.
4. Replace a PCI Express card.
Figure 27. Removing a PCI Express card
Note: If the card is held in place by a retaining latch, press the latch as shown to disengage the latch.
Then, gently remove the card from the slot.
.
Chapter 7
CRU replacement
59