Philips BDP3000/55 User Manual page 20

7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this product to
Philips website.
1
Press .
2
Select [Settings], then press OK.
3
Select [Advanced Setup] > [Version Info.],
then press OK.
Update software via network
1
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
»
You are prompted to start upgrading
processs if upgrade media is detected.
3
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
4
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
product.
2
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG".
b Put the "UPG" folder in the root
directory.
3
the rear panel.
4
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
6
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Care
Clean discs
the centre to the edge in a straight line movement.
Play media
Accessories supplied
Video
USB jack of
Audio
Note
drive when software updating is in progress to prevent
possible damage of this product.
Caution
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Note
notice
BD-Video, DVD-Video, DVD+R/+RW, DVD-
R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio
CD, Video CD/SVCD, Picture CD, MP3-CD,
Remote control and batteries
Audio/Video cables
HDMI cable
Power cable
Quick start guide
User manual
Signal system: PAL / NTSC
Component video output: 480/576i, 480/576p,
720p, 1080i
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
2 Channel analog output
Coaxial
EN 21