Copying The Recording Schedule; Normal; Sensor - LG LRH7080D Series Owner's Manual

38 Installation
3
2. Enter the name of the special day. Use w/s/a/d to select
the [Name] column and press OK. The virtual keyboard menu
appears.
3. Use w/s/a/d to enter the necessary information for year,
month and date. You can use the calendar icon to select the
date.
4. Select the time cell block on the desired channel.
NOTE
If the special day recording schedule is duplicated with the other
recordings, only the special day recording is possible.

Copying the Recording Schedule

Copying from the Scheduled Data of the Channel
You can copy the schedule data of the channel to the other
channel(s) within the selected day of the week. You cannot copy the
schedule data of the IP channel.
1. Select the day of the week and press OK on the [Normal
Schedule] or [Special Schedule] menu.
2. Select [Channel Copy] then press OK then the channel selection
menu appears.
3. Use w/s/a/d to select a channel then press OK to select
the target channel(s).
You can cancel the selected channel by pressing OK.
4. Select [OK] then press OK to confirm your selection.
Copying from the Scheduled Data of the Day
You can copy the scheduled day of the week to another day of the
week, weekday and weekend.
1. Select the day of week that you want to copy.
2. Select [Day Copy] then press OK then the channel selection
menu appears.
3. Use w/s/a/d to day of the week then press OK to select
the target date(s). You can cancel the selected channel by
pressing OK.
4. Select [OK] then press OK to confirm your selection.

Normal

Settings concerning normal recording.
• CH: Displays the channel number.
• Resolution: Selects the recording resolution.
• Quality: Selects the recording picture quality.
• Frame Rate: Selects the frame rate. The frame rate is the number
of recorded frames per second. According to resolution, the
frame rate is set automatically.

Sensor

Settings concerning sensor recording.
• CH: Displays the channel number.
• Resolution: Selects the recording resolution.
• Quality: Selects the recording picture quality.
• Frame Rate: Selects the frame rate. The frame rate is the number
of recorded frames per second. According to resolution, the
frame rate is set automatically.
• Prealarm: Specify the pre-event recording time. When the Event
signal is detected, the DVR recordes the data before the event
during the setting time.
• Postalarm: Specify the post-event recording time. When the
Event signal is detected, the DVR recordes the data after the
event during the setting time.