Table of Contents
Advertisement
[Keystone]
[H/V Keystone]
[Corner correction]
[Curved correction]
[Reset value]
[Keystone]
Sets whether or not to keep the keystone correction even after the projector is turned off or the power cord is disconnected.
1)
Press as to select [Keystone].
2)
Press the <ENTER> button.
f The [Keystone] screen is displayed.
3)
Press as to select [Keystone].
4)
Press the <ENTER> button.
5)
Press as to switch the item.
f The items will switch each time you press the button.
[Reset]
[Store]
[H/V Keystone]
1)
Press as to select [Keystone].
2)
Press the <ENTER> button.
f The [Keystone] screen is displayed.
3)
Press as to select [H/V Keystone].
4)
Press the <ENTER> button.
f The [H/V Keystone] individual adjustment screen is displayed.
5)
Press asqw to adjust the item.
Items
Press the w button.
Horizontal
Press the q button.
Press the a button.
Vertical
Press the s button.
Note
f The red arrow indicates the direction in which distortion has been corrected while the white arrow indicates the direction in
which distortion has not been corrected.
f The arrow disappears when correction reaches the maximum level.
[Corner correction]
1)
Press as to select [Keystone].
62 - ENGLISH
Chapter 4 Settings - [Expand] menu
Sets whether or not to keep the keystone correction even after the projector is turned off or
the power cord is disconnected.
Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
Adjusts when the four corners of the projected image are distorted.
Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted.
Return the corrected values to the factory default values.
If the [Setting] menu → [Standby mode] is set to [Eco], the keystone correction will be canceled
when you disconnect the power cord or turn off the projector.
If the [Setting] menu → [Standby mode] is set to [Normal], the keystone correction will be canceled
when you disconnect the power cord; the keystone correction will be kept when you turn off the
projector.
The keystone correction will be kept when you plug out the power cord or turn off the projector.
Operation
Adjusts the right of the keystone.
Adjusts the left of the keystone.
Adjusts the upper of the keystone.
Adjusts the bottom of the keystone.
Adjustment
Advertisement
Table of Contents
