Table of Contents
Advertisement
Chapter 3 Basic Operations - Basic operations by using the remote control
Note
f For more details, refer to the [Display] menu → [Aspect] (x page 51).
Using the screen adjustment function
You can correct the trapezoidal distortion and the curved distortion of the projected image.
button
1)
Press the <KEYSTONE> button on the remote control.
f The selection screen of screen adjustment function is displayed.
f You can also press the <KEYSTONE> button on the control panel.
[H/V Keystone]
[Corner correction]
[Curved correction]
[Reset value]
2)
Press as to select [H/V Keystone], [Corner correction], or [Curved correction].
3)
Press the <ENTER> button.
f The individual adjustment screen of the selected item is displayed.
4)
Press asqw to adjust.
Note
f For more details, refer to the [Expand] menu → [Keystone] (x page 61).
f Press the <KEYSTONE> button on the control panel or on the remote control when the [H/V Keystone], [Corner
correction] or [Curved correction] individual adjustment screen is displaying, the individual adjustment screen will switch
as follows.
- [H/V Keystone] [Corner correction] (Upper left) [Corner correction] (Upper right) [Corner correction] (Lower right)
[Corner correction] (Lower left) [Curved correction X/Y Gain] [Curved correction X Offset] [Curved correction Y
Offset] [H/V Keystone] ...
Using the status function
Dsplay the status of the projector.
button
1)
Press the <INFO.> button on the remote control.
f The [Info.] screen is displayed.
2)
Press the <INFO.> button again.
f The [Info.] screen disappears.
Note
f For more details, refer to the [Info.] menu (x page 74).
Select when the trapezoid of the projected image is distorted.
Select when the four corners of the projected image are distorted.
Select when the linearity is not uniform or the projected image is curved distortion.
Return all adjusted values of the screen adjustment function to the factory default values.
ENGLISH - 41
Advertisement
Table of Contents
