Powering On The Projector; A Pin Code Input Screen Appears - Panasonic PT-LW333 Operating Instructions (Functional Manual)

Powering On the Projector

Before switching on the projector, make sure all the other devices are correctly connected. (
2) 1)
1) Connect the power cord to the projector body.
2) Connect the power plug to an outlet.
f The power indicator <ON(G)/STANDBY(R)> lights in red, and the projector will enter the standby mode.
3) Press the power <v/b> button on the control panel or on the remote control.
f The power indicator <ON(G)/STANDBY(R)> blinks in red, after a while the indicator lights in green. (The factory default
setting of [Standby mode] is [Eco].)
f The startup display appears on the screen and the count down starts, and the image will be projected on the screen
after the countdown.
Note
f During count down, all the buttons are not available except for the power <v/b> button.
f If [Standby mode] is set to [Normal], the power indicator <ON(G)/STANDBY(R)> lights in green when powering on the
projector.

A PIN code input screen appears

If the [PIN code] of the projector has been set, the PIN code input screen will be displayed after the completion of the startup
display. Please enter a PIN code as the following steps.
1) Press the <ENTER> button.
2) Press as to select the number from 0 to 9.
3) Press the <ENTER> button.
f The fixed number changes to , and the cursor moves to the next frame.
4) Repeat the above steps to enter a three-digit number.
f Move the cursor to [Set] when fixed a three-digit number.
5) Press the <ENTER> button.
f The image will be projected on the screen.
Note
f When [PIN code lock] is set to [On] in [Security] menu, the PIN code input screen will be displayed after startup display. The
projector will turn off automatically when input an incorrect PIN code or without any operation within 3 minutes.
f If you want to correct the digit, press the <MENU> button to reset the digit and then re-enter it.
f Press the <ENTER> button after moving the cursor to [Cancel] to reset the all digits.
f If you entered an incorrect digit, the digit () will turn red and reset, and then re-enter a digit.
f The initial PIN code is "111".
38 - ENGLISH
Chapter 3 Basic Operations - Powering on/off
3)
Æ
page 32)
3)