Connecting Example : Computers - Panasonic PT-LW333 Operating Instructions (Functional Manual)

Attention
f Always use one of the following when connecting a VCR.
- A VCR with built-in time base corrector (TBC).
- A time base corrector (TBC) between the projector and the VCR.
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector
(TBC) between the projector and the external devices.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to
HDMI standards is used, images may be interrupted or may not be displayed.
f This projector does not support the VIERA link (HDMI).
f When the <VARIABLE AUDIO OUT> terminal is connected with cable, the sound will not be output from the built-in speaker.
f When input S-video signal, the optional D-SUB - S Video Conversion cable (Model No. ET-ADSV) is required.

Connecting example : Computers

r For PT-LW373, PT-LW333, PT-LB423, PT-LB383 and PT-LB353
Computer
Audio equipment
34 - ENGLISH
Chapter 2 Getting Started - Connecting
Computer
Control computer
Computer
Computer
USB memory/
Wireless module
(Model No.: ET-WML100)
Control computer