Highland; Rgb/Yp B Pr; Volume; Detailed Setup - Panasonic PT-LB51SE Operating Instructions Manual

Table of Contents

Advertisement

OPTION menu

HIGHLAND

If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
I H to select the required option.
OFF
ON
NOTE:
• At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
• The loudness of fan noise depends on the HIGHLAND
setting.
RGB/YP
P
B
(480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p
and VGA480 signals only)
This sets the signal that is input to the COMPUTER1 IN
and COMPUTER2 IN/1 OUT connector.
Normally "AUTO" should be selected. RGB or YP
selected automatically depending on the synchronising
signal status.
If an image is not projected correctly, select "RGB" or
"YP
P
" in accordance with the input signal.
B
R
AUTO
RGB
YP
P
B
R

VOLUME

You can adjust the volume of the sound that is output
from the projector's built-in speaker and VARIABLE
AUDIO OUT connector.
E
NGLISH - 38
The fan speed is low.
The fan speed is high.
R
automatically
RGB
YP
P
B
R

DETAILED SETUP

You can perform more detailed setting in various items.
INDEX-WINDOW
This functions in the same way as the INDEX-
WINDOW button on the remote control unit.
Refer to "Projecting an image in INDEX-WINDOW
mode" on page 27 for details.
SHUTTER
This functions in the same way as the SHUTTER
button on the remote control unit.
Refer to "Stopping the projection temporary" on
page 26 for details.
OSD DESIGN
You can change the background colour of the
menu. Press I H to select the required option.
P
is
TYPE1
B
R
TYPE2
TYPE3
SXGA MODE
(COMPUTER SXGA signals only)
You can switch the setting between SXGA and the
larger setting, SXGA+. Press I H to select the
required option.
XGA MODE
(COMPUTER XGA signals only)
You can switch the setting between XGA and the
wider setting, WXGA. Press I H to select the
required option.
BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press I H to select the required option.
ON
OFF
BACK COLOR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press I H to select the
required option.
Semi transparent black
Solid blue
Semi transparent dark blue
Include the BLACKBOARD in menu
items.
Exclude the BLACKBOARD in menu
items.

Advertisement

Table of Contents
loading

Table of Contents