Projection Method; Front Adjustable Legs And Throwing Angle - Panasonic PT-LB51SE Operating Instructions Manual

Projection method

You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
See "INSTALLATION" on page 37..
Setting on a desk/floor and
projecting from front
INSTALLATION: FRONT/DESK
Mounting in the ceiling and
projecting from front
INSTALLATION: FRONT/CEILING
NOTE:
• A translucent screen is required for rear projection.
• When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKB50) is required.

Front adjustable legs and throwing angle

You can adjust the projection angle in the vertical direction by pressing the Font leg adjuster buttons.
See "Positioning the image" on page 24.
NOTE:
• Heated air comes out of the Air exhaust port. Be careful of this when adjusting the Font adjustable legs.
• If keystone distortion occurs, see "KEYSTONE" on page 34.
Setting on a desk/floor and
projecting from rear
INSTALLATION: REAR/DESK
Mounting in the ceiling and
projecting from rear
INSTALLATION: REAR/CEILING
Setting up
E
NGLISH - 17