Panasonic PT-LB51NTEA Quick Manual

Macintosh

Installing the software

• Wireless Manager mobile edition (henceforth abbreviated to "ME") 4.5 is used to
send screen images from a computer to the projector via a wireless LAN.
• Before installation, see "System requirements" at the upper right of this guide.
• Shut down all software currently active on your computer. Otherwise, installation
may not be possible.
• Administrator authority is required for installation.
1
Set the supplied CD-ROM in the CD or DVD drive.
2
Double-click [WMmac4.5.dmg] in the CD or DVD drive.
[WMmac] appears on the desktop.
3
Double-click [Wireless Manager.pkg].
• The installer starts up.
• Follow the instructions on the screen to install this software.
• If the name and password setting window appears, enter those of the
administrator.
• Install Wireless Manager ME 4.5 in the [Applications] folder (./Applications).
Viewing the operating instructions
The "Wireless Function Edition for Macintosh" document is stored in the supplied CD-
ROM in PDF file form.
1
Set the supplied CD-ROM in the CD or DVD drive.
2
Double-click [Index.pdf] in the CD or DVD drive.
Click on a desired document name on the displayed list.
ENGLISH
Using wireless functions
• For details of usage, see "Wireless Function Edition for Macintosh" in the supplied CD-ROM.
• You cannot connect this model to a computer via the wired LAN.
I Easy wireless set up
1
Launch Wireless Manager ME 4.5.
The network adaptor selection window appears.
Select the adaptor from the list and
2
click [OK].
If the confirmation dialog window
3
appears, click [YES].
If the user name setting window appears, set the icon and user
4
name, and click [OK].
In [Network], select the same network number as is displayed in
5
the [NETWORK] menu of the projector to connect.
6
Select the projector to connect, and click [OK].
7
Click [ ] in the menu bar.
8
Click [Live Mode] in the menu.
Wireless Function Quick Guide
(PT-LB51NTU/PT-LB51NTE/PT-LB51NTEA)
TQDJ19083 (En) M0607-0
I System requirements
OS: Mac OS X v10.4
CPU: 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster
RAM: 256 MB or more (512 MB or more is recommended)
Empty hard
disk capacity: 60 MB or more
Web browser: Safari 2.0 or newer
Hardware
conditions: CD or DVD drive
Wireless LAN function
Wireless LAN: An 802.11 b/g built-in wireless LAN adaptor must be running properly.
However, some 802.11 b/g wireless LAN may not allow connection to 802.11 g
projector.
• Operation is not guaranteed for all computers that meet the above conditions.
• Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.
• It is forbidden to take the projector outside the country or region where you purchased it, so
use it only in the said country or region. Also, note that depending on countries or regions
there are restrictions on the channels and frequencies at which you can use the wireless
LAN.
• You must agree to the "Software Licensing Agreement" to use the supplied software. Please
read it carefully when it is displayed during installation.
URL : http://panasonic.co.jp/pavc/global/projector/
•
Macintosh is a registered trademark of Apple Inc. in the USA and other countries.
•
PowerPC is a registered trademark of IBM Corporation.
•
Intel Core is a registered trademark of Intel Corporation in the USA and other countries.
The projectors illustrated as examples are PT-LB51NTU.
<Live mode>
Used for normal presentations.
I Other examples of usage
<Infrastructure mode (Connecting through the access point)>
<Using WebBrowser>
See "Wireless Function Edition for Macintosh" in the supplied CD-ROM.
LAN
Access point (AP)