Table of Contents
Advertisement
Technical Information
Cable specifications
(When connected to a personal computer)
Control commands
Command
Control contents
PON
POF
AVL
IIS
Lamp condition
Q$S
OSH
E
NGLISH - 48
Projector
In standby mode, all commands other than the PON command are
Power ON
ignored.
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after the
Power OFF
lamp has switched off, the lamp is not turned back on again straight away
in order to protect the lamp.
Parameter
Volume
000 - 063 (Adjustment value 0 - 63)
Parameter:
VID = VIDEO
INPUT
RG1 = COMPUTER1
NWP = WIRELESS
Call back
0 = Standby
query
1 = Lamp ON control active
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
SHUTTER
If a command other than "OSH" is sent to the projector when the shutter
function is used, the "ER401" command will be sent from the projector to
the computer and the shutter function will be turned off.
PC (DTE)
Remarks
SVD = S-VIDEO
RG2 = COMPUTER2
2 = Lamp ON
3 = Lamp OFF control active
Advertisement
Table of Contents
