Highland; Test Pattern; Detailed Setup - Panasonic PT-F100NTE Operating Instructions Manual

OPTION menu

HIGHLAND

If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
I H to select the required option.
OFF
ON
NOTE:
• At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
• The loudness of fan noise depends on the HIGHLAND
setting.

TEST PATTERN

You can use the 7 different test patterns to adjust the
focus of the image. See "Lens shift and positioning" on
page 18.
1. Press ENTER to display the test pattern 1.
2. Press F G to select the required test pattern.
3. Adjust the focus with the Focus lever.
4. Press MENU or RETURN to return to the previous
menu, oar press repeatedly to escape the menu
mode.
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu.
E
NGLISH - 38
The fan speed is low.
The fan speed is high.

DETAILED SETUP

You can perform more detailed setting in various items.
OSD DESIGN
You can change the background colour of the
menu. Press I H to select the required option.
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue
SXGA MODE
You can switch the setting between SXGA and the
larger setting, SXGA+. Press I H to select the
required option.
XGA MODE
You can switch the setting between XGA and the
wider setting, WXGA. Press I H to select the
required option.
BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press I H to select the required option.
ON Include the BLACKBOARD in menu
items.
OFF Exclude the BLACKBOARD in menu
items.
BACK COLOUR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press I H to select the
required option.
VOLUME
You can adjust the volume of the built-in monaural
speaker and VARIABLE AUDIO OUT terminal.
Decrease
I
Increase
H
AUDIO BALANCE
You can adjust to hear the sound played equally
through both right and left external stereo
speakers, or shift the balance so more sound plays
through the left or right side.
More sound plays through the left
I
side
More sound plays through the right
H
side
INITIALISE ALL
You can reset all of the customised settings to the
factory defaults except LAMP RUNTIME and
FILTER REMAINING menu settings. Press
ENTER to initialise and restart the projector by
pressing the POWER button.