Chapter 2: Unpacking - Elo TouchSystems ESY15i1 User Manual

Chapter 2: Unpacking

Unpacking the i-Series Interactive Signage System
1. Carefully cut through the top piece of tape to open the top flaps.
2. Remove the top layer of the packaging pulp.
a. The accessory box and the covered monitor will now be visible.
3. Lift the accessory box out of the packaging box to provide access to the required cables.
4. Remove the monitor from the box and set it down.
User Manual: i-Series Interactive Signage
SW602242 Rev C, Page 5 of 35