Listening To Music On A Bluetooth Device - Sony MHC-V50 Operating Instructions Manual

Hide thumbs Also See for MHC-V50:
Table of Contents

Advertisement

To erase pairing information
Use the keys on the touch panel of
the unit to perform this operation.
1
Touch BLUETOOTH to select
BLUETOOTH function.
"BT AUDIO" appears on the display.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears on the display.
Touch BLUETOOTH to disconnect the
BLUETOOTH device.
2
Touch and hold ENTER and
 – for about 3 seconds.
"BT HIST CLEAR" appears on the
display and all the pairing
information is erased.
Listening to music on a
BLUETOOTH device
You can operate a BLUETOOTH
device by connecting the system
and the BLUETOOTH device using
AVRCP.
Check the following before playing
music:
— The BLUETOOTH function of the
BLUETOOTH device is turned on.
— Pairing has been completed
(page 25).
Once the system and the
BLUETOOTH device are connected,
you can control playback by
pressing , , , / and
/.
1
Touch BLUETOOTH on the unit to
select the BLUETOOTH function.
"BT AUDIO" appears on the display.
26
US
2
Establish connection with the
BLUETOOTH device.
Touch BLUETOOTH on the unit to
connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH connection
from the BLUETOOTH device if the
device is not connected.
Once the connection is established,
the BLUETOOTH device name
appears on the display.
3
Touch  to start playback.
Depending on the BLUETOOTH
device,
— you may need to touch  twice.
— you may need to start playing an
audio source on the BLUETOOTH
device.
4
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first. If the
volume level is still too low, adjust
the volume level on the system.
Note
When the system is not connected to
• •
any BLUETOOTH device, the system
will connect to the last connected
BLUETOOTH device automatically when
you touch BLUETOOTH or  on the
unit.
If you try to connect another
• •
BLUETOOTH device to the system, the
current connected BLUETOOTH device
will be disconnected.
To terminate the BLUETOOTH
connection
Touch BLUETOOTH on the unit. "BT
AUDIO" appears on the display.
Depending on the BLUETOOTH
device, the BLUETOOTH connection
may be terminated automatically
when you stop playback.

Advertisement

Table of Contents
loading

Table of Contents