Table of Contents
Advertisement
2.
3.
Enter a Network
Name (SSID).
Setup the WEP settings
for your need.
IMPORTANT
Check this to enable Ad-
hoc mode.
You can build up the Ad-hoc network by clicking
Add... in the Preferred Networks field.
Click
Set up the Network Name (SSID) and Network Key
(if needed) for the network. Then, check the This
is a computer-to-computer [ad hoc] network;
wireless access points are not used option and
click OK to enable the Ad-hoc mode.
2 1
Click
Advertisement
Table of Contents
