Page 1
How to detect Thunderbolt device on ThunderboltM3...
Page 2
Step0: Please refer manual on page2 and page3 for installing ThunderboltM3 card.
Page 3
Step0: Please refer manual on page2 and page3 for installing ThunderboltM3 card.
Page 4
Step1: Please setting “Windows10 WHQL Support” to UEFI in BIOS setup. • Settings \ Advanced\Windows OS configuration\Windows10 WHQL Support: UEFI – Fourth level » Fifth level...
Page 5
Step2: Please setting “Discrete Thunderbolt(TM) Support ” to Enabled in BIOS setup. • Settings \ Advanced \ Intel® Thunderbolt / Discrete Thunderbolt(TM) Support : Enabled...
Page 6
Step3: Press F10 button for saving change and exit. • Or please press “Save Changes and Reboot” and then press “OK button”. Setting \ Save & Exit...
Page 8
Step6: Please wait 20 seconds. Step7: Press F10 button for saving change and exit. Please refer setp3. Step8: Install Windows 10 OS again and then must be connect Thunderbolt device on ThunderboltM3 card.
Page 9
Step9: Please install driver for this unknown device- “Base System device” in device manager. • It is driver for ThunderboltM3 on MSI website. https://www.msi.com/PC-component/support/ThunderboltM3 •...
Page 10
Step10: It will be showed “Thunderbolt(TM) control” in device manager after installing driver.
Page 11
Step11: Please install “Thunderbolt Control Center” on Microsoft store.
Page 12
Step12: Please setting “Always Connect” in “Thunderbolt Control Center” and then also click “OK” button.
Page 13
• It is manual for ThunderboltM3 on MSI website. https://tw.msi.com/PC- • component/support/ThunderboltM3#down-manual • It is driver for ThunderboltM3 on MSI website. https://www.msi.com/PC-component/support/ThunderboltM3 • • It is compatibility device for ThunderboltM3 on MSI website, please click “compatibility” button first. https://www.msi.com/PC- • component/support/ThunderboltM3#support-test...
Need help?
Do you have a question about the ThunderboltM3 and is the answer not in the manual?
Questions and answers