inventum BDP619 Instruction Manual page 39

E2E4: there was shaking while
measuring
Battery icon on
The systolic pressure value or diastolic
pressure value is too high.
The systolic pressure value or diastolic
pressure value is too low.
12
EMC statement
a. A statement to the effect that this equipment needs to be installed and put into service in accordance with the information provided in
the user manual; and
b. A statement to the effect that wireless communications equipment such as wireless home network devices, mobile phones, cordless
telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least at a distance d=3,3 m away from
the equipment. The distance d is calculated by the manufacturer from the 800 MHz to 2,5 GHz column of Table 5 or Table 6 of IEC 60601-
1-2:
.
2007, as appropriate
Hand or body shaking while measuring.
Batteries are low.
1. The wrist cuff was held lower than
your heart.
2. The wrist cuff was not attached
properly.
3. You moved your body or spoke
during measurement.
1. The wrist cuff was held higher than
your heart.
2. You moved your body or spoke
during measurement.
Keep static and correct gesture and measure again.
Replace the batteries and measure again.
Keep correct position and gesture and measure
again.
39
English •