inventum BDP619 Instruction Manual page 31

Date, time and unit settings
It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to
each record that is stored in the memory. (year: 2013—2099, time format: 24 H)
1. Press and hold the "SET" button until the year number appears and
blinks to enter the setting mode.
2. Press the "MEM" button to adjust the year, then press the "SET"
button to confirm your selection and it will turn to the next step.
3. Repeat step 2 to confirm [MONTH] , [DAY], [HOUR] and [MINUTE].
The blood pressure monitor can display two kinds of blood pressure units, mmHg and kPa. The factory setting is measuring unit: mmHg.
4. When the appliance is off, change the measuring unit by pressing
and holding the ON/OFF button for more than 10 seconds. Switch
the measuring unit by pressing the "MEM" button. Confirm by
pressing "SET".
31
English •