Table of Contents
Advertisement
7.12 Setting the language
To modify the language of the display (B13), proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (fig. 9) until "Set language" is
displayed;
3. Press the OK button (B12- fig. 10);
4. Press < or > until the required language is displayed;
5. Press the OK button to confirm;
6. A message confirming the language installed is displayed;
7. Press the MENU/ESC button to exit the menu.
7.13 Beep
This enables or disables the beep emitted by the machine each
time a button is pressed or an accessory is inserted/removed. To
disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (fig. 9) until "Beep" appears on the
display (B13);
3. Press the OK button (B12- fig. 10): the message "Disa-
ble?" is displayed (or "Enable?" if the function has been
disabled);
4. Press the OK button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
7.14 Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (fig. 9) until "Default values" ap-
pears on the display (B13);
3. Press the OK button (B12- fig. 10);
4. The message "Confirm?" is now displayed
5. Press the OK button to confirm and exit.
7.15 Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (fig. 9) until "Statistics" appears on
the display (B13);
3. Press the OK button (B12- fig. 10);
4. By pressing < or > you can check:
-
how many coffees have been made;
-
the total number of cappuccinos and milk based coffees;
-
the total number of litres of water delivered;
-
how many times the machine has been descaled;
-
how many times the water softener filter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.
8. MAKING COFFEE
8.1 Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
repeatedly until the required taste is displayed.
8.2 Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (B15- fig. 12) until the message corresponding to the
required quantity of coffee is displayed:
Coffee selected
MY COFFEE
SHORT
STANDARD
LONG
EXTRA LONG
8.3 Customising the "my coffee" quantity
The appliance is set by default to automatically deliver 30 ml of
"MY COFFEE". To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (A7-fig. 13).
2. Press the
is displayed.
3. Press and hold the
sage "1 MY COFFEE Program quantity" is displayed. Then
release the button;
4. As soon as the coffee in the cup reaches the required level,
press the
button again.
The quantity of coffee in the cup has now been programmed.
12
button (B2- fig. 11)
Quantity in cup
(fl.oz/ml)
Programmable:
from ≃0,68/20 to
≃6,09/180
≃1,35/40
≃2,03/60
≃3,04/90
≃4,06/120
button (B15- fig.12) until "MY COFFEE"
button (B11-fig. 17) until the mes-
Advertisement
Table of Contents
Troubleshooting
