Auto-Off (Standby); Cup Warmer; Energy Saving; Coffee Temperature - DèLonghi PRIMADONNA ELITE ECAM65 75 Series Instructions For Use Manual

2. Press < (B10) or > (B8) until "
the display (B);
3. Select the function by pressing "
panel appears on the screen;
4. Press < o > corresponding to the hours and minutes until
the auto-start time is displayed;
5. Press or
auto-start.;
6. To confirm, press "
settings menu by pressing "
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.

8.7 Auto-off (standby)

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
the display (B), together with the current selection (15 or 30
minutes, or 1, 2 or 3 hours);
3. Press " " to select the required value;
4. Press " ESC" to go back to the homepage.
Auto-off is now programmed.

8.8 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
on the display (B);
3. Press " " per attivare-
the cup warmer.
4. Press " ESC" to go back to the homepage.

8.9 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) o > (B8) until "
on the display (B);
3. Press " " to enable-
energy saving.
4. Press " ESC" to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
AUTO-START" appears on
". The time setting
to enable or disable
OK" (or cancel and go back to the
ESC"), then press "
AUTO-OFF" appears on
CUP WARMER" appears
or disable-
ENERGY SAVING" appears
or disable -

8.10 Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
pears on the display (B) together with the current selection
(LOW, MEDIUM, HIGH or MAX);
3. Press " " to select the required temperature;
4. Press " ESC" to go back to the homepage.
ESC"
Please note!
A different temperature can be set for each profile (see section
"15. Memorising your personal profile").

8.11 Water hardness

For instructions on setting water hardness, see section "18. Set-
ting water hardness".

8.12 Selecting the language

To modify the language of the display (B), proceed as follows:
"
1. Press "
2. Press < (B10) o > (B8) finché appare sul display "
LECT LANGUAGE" appears on the display;
3. Press " " : press < (B10) or > to display and select the flag
corresponding to the required language;
4. Press " ESC" twice to go back to the homepage.

8.13 Beep

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
display (B);
3. Press " " to enable-
the beep;
4. Press " ESC" to go back to the homepage.

8.14 Cup lighting

This function enables or disables the cup lights. The lighting is
enabled by default.
The lights comes on each time a coffee or milk-based drink is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until " CUP LIGHTING" appears on
the display (B);
3. Press " " to enable-
cup lighting;
12
COFFEE TEMPERATURE" ap-
(B2) to enter the menu;
BEEP" appears on the
or disable-
or disable -
SE-
the