Table of Contents
Advertisement
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
•
first turn the appliance off by pressing the
(fig. 6);
•
press the main switch (A22) (fig. 2).
Important!
Never press the main switch while the appliance is on.
8. MENU SETTINGS
The menu has 6 items, some divided into subgroups:
•
Language;
Maintenance:
•
- Descale,
- Install filter,
- (if a filter has been installed): Replace filter,
- (if a filter has been installed): Remove filter;
•
Prg. beverages;
•
Prg. my beverages;
General:
•
- Set temperature,
- Water hardness,
- Auto-off,
- Energy saving,
- Beep,
- Default beverages,
- Default values;
•
Statistics.
8.1 Language
To modify the language of the display (B1), proceed as follows:
1. Press
(B6) to enter the "Settings" menu;
2. Press OK (B3) to select "Language". The available languag-
es are displayed;
3. Press the selection arrows (B2 and B4) until the required
language is displayed between the two lines;
4. Press OK to confirm;
5. The appliance goes back to the "Settings" menu;
6. Press
/ESC (B5) to exit the menu.
8.2 Maintenance
Here you can find all the maintenance operations required by
the appliance over time:
Descale: For instructions on descaling, see section "15.
•
Descaling".
Install filter: For instructions on how to install the filter
•
(C4), see section "17.1 Installing the filter".
To select the operation you require, proceed as follows:
1. Press
(B6) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Maintenance"
is displayed between the two lines;
3. Press OK (B3) to confirm;
4. Press the selection arrows to display the operation to be
button
performed;
5. Press OK to confirm and perform the operations as de-
scribed in the corresponding sections.
8.3 Program beverages
The appliance is set by default to automatically deliver standard
quantities. To change these quantities and customise the direct-
ly selected beverages and the
follows:
1. Press
2. Press the selection arrows (B2 and B4) until "Prg. beverag-
es" is displayed between the two lines;
3. Press OK (B3) to confirm: the appliance lists the beverages
you can customise;
4. Press the selection arrows until the beverage you want to
customise is displayed, then press OK to confirm;
5. Beverages with coffee: "Program aroma" appears on
the display: press the selection arrows (B2 and B4) or
(B7) until the required aroma is selected (see section "10.4
Temporarily varying the coffee aroma"), then press OK.
"Program coffee" appears on the display together with a
bar which gradually fills as delivery progresses. When the
required quantity is reached, press OK;
Cappuccinos and milk-based coffees: after selecting
the aroma, "Program milk" appears on the display togeth-
er with a bar which gradually fills as milk delivery pro-
gresses. When the required quantity is reached, press OK.
The appliance then makes the coffee. Press OK to interrupt
delivery when the required quantity of coffee is reached.
Hot water: press OK. Delivery begins: press OK when the
required quantity is reached.
6. "Save parameters?": to save the settings, press OK (other-
wise press /ESC - B2 or B5).
7. "Parameters saved" (or "Parameters not saved"). The ap-
pliance is ready for use again.
8.4 Program My beverages
Follow the procedures described in the previous section "8.3 Pro-
gram beverages"to customise the beverages in the "
" (B14) or proceed with direct programming, as described in
section "12. "
8.5 General
Here you can find the settings to customise the basic functions
of the appliance:
11
(B6) to enter the "Settings" menu;
" Programming and selecting".
(B14), proceed as
Advertisement
Table of Contents
Troubleshooting
