Mounting On A Table - LG M2250D Owner's Manual

3
Remove 2 screws and pull out the Stand Body
from the Monitor set.

Mounting on a table

1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
10 cm
10 cm
10 cm
ASSEMBLING AND PREPARING
WARNING
When you adjust the angle, do not hold the
buttom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
CAUTION
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
NOTE
Tilt from +10 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
- 5
Front
11
10
Rear