LG M2250D Owner's Manual page 62

62
CUSTOMIZING SETTINGS
Advanced image options
Setting
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
(Off/Low/High) picture is improved by making bright parts brighter and dark parts darker.
Dynamic Colour Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
(Off/Low/High ) hue, saturation and luminance so that red, blue, green and white look more vivid.
Noise Reduction Reduces screen noise without compromising video quality.
(Off/Low/Medium/
High)
Gamma You can adjust brightness of dark area and middle gray level area of the picture.
(Low/Medium/High)
Black Level
(Low/High/Auto)
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI or
Component. Otherwise, 'Black level' is set to 'Auto'.
Film Mode You can watch a cinema-like video by eliminating judder effect.
(On/Off) Use this function when you watch movies.
Colour Standard
Converts the colour of a different video to HD colour. This function is set for SD video (BT-601)
(SD/HD)
and HD video (BT-709) colour format.
Expert Pattern This is the pattern necessary for expert adjustment.
(Off/Expert 1/Expert 2) This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter This is the function to filter the specific colours of the video.
(Off/Red/Green/Blue) You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature This is the function to adjust the overall colour of the screen to the feeling you want.
(Medium/Warm/Cool) y A
y B
Colour Management As the tool used by the experts to make adjustments by using the test patterns, this does not
System affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Cyan/ Magenta/Yellow). Colour difference may not be distinctive even when you make the
adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
This feature is disable in RGB-PC and HDMI (PC) mode.
» Low: Make dark and middle gray level area of the picture brighter.
» Medium: Express original picture levels.
» High: Make dark and middle gray level area of the picture darker.
» Low: The picture of the screen gets darker.
» High: The picture of the screen gets brighter.
» Auto: Realizing the black level of the screen and set it to High or Low automatically.
» Method: 2 Points
» Pattern: Inner, Outer
» Red/Green/Blue Contrast, Red/Green/Blue Brightness :
» The adjustment range is -50 to +50.
» Method: 10 point IRE
» Pattern: Inner / Outer
» IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and
can be set among 10, 20, 30 to 100. You can adjust Red, Green or Blue according to
each setting.
» Red/Green/Blue: The adjustment range is -50 to +50.
» Red/Green/Blue/Yellow/Cyan/Magenta Colour: The adjustment range is -30 to +30.
» Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 to +30.
Description