Using The Input List - LG M2250D Owner's Manual

36
WATCHING TV

Using the input list

Selecting an input source
1
Press INPUT to access the input source list.
- The connected device displays on each input
source.
2
Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Antenna or Watch TV over the air, cable, and
Cable digital cable broadcast
RGB View a PC display on the screen
AV Watch the contents in a VCR or
other external devices
Component Watch the contents in a DVD or
other external devices, or through
a digital set-top box
HDMI Watch contents in a PC, DVD
or Digital settop box other high
definition devices
The connected input sources display in black
and the disconnected input sources in grey.
- If you add an input label to each input
sources, you can easily identify a device
connected to each input source.
Adding an Input label
1
Press MENU to access the main menus.
2
Press the Navigation buttons to scroll to
OPTION and press OK.
3
Press the Navigation buttons to scroll to
Input Label and press OK.
4
Press the Navigation buttons to scroll to one of
the input sources.
5
Press the Navigation buttons to scroll to one of
the input label and press OK.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If you want to use HDMI-PC mode, you
y y
must set the input label to PC mode.
Description
NOTE
The OSD (On Screen Display) is displayed
y y
on the screen as shown below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
» When connecting an HDMI cable with no
signal.
Is the input connected to your PC?
Yes
Do not show message again.
If you select "Yes" the size and image quality
y y
are optimised for your PC.
If you select "No" the size and image quality
y y
are optimised for the AV device (DVD
player, set-top box, gaming device).
If you select "Do not show message
y y
again" this message does not appear until
the monitor is reset. You can change the set
value in Menu ► OPTION ► Input Label.
The values set for HDMI1/HDMI2 are saved
y y
independently.(Only DM2350D Model)
No