LG M2250D Owner's Manual page 102

102
EXTERNAL CONTROL DEVICE SETUP
20. Programme Add/Skip (Command: m b)
To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Real data mapping
00 : Step 0
:
A : Step 10 (Set ID 10)
:
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
:
64 : Step 100
:
6E : Step 110
:
73 : Step 115
74 : Step 116
:
CF : Step 199
:
FE : Step 254
FF : Step 255
01 : Add
Tint
Step 0 : R50
:
Step 49 : R1
Step 50 : 0
Step 51 : G1
:
Step 100 : G50
Balance
Step 0 : L50
:
Step 49 : L1
Step 50 : 0
Step 51 : R1
:
Step 100 : R50
Colour Temperature
Step 0 : W50
:
Step 49 : W1
Step 50 : 0
Step 51 : C1
:
Step 100 : C50
21. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Data Key cod -See p.94
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
22. Back Light (Command: m g)
To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 to Max: 64
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b) (Main Picture Input)
To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
Data 00: DTV
10: Analogue
20: AV
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
40: Component
60: RGB
90: HDMI