Table of Contents
Advertisement
THE MAIN OVEN - GRILL
CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS IN USE.
CHILDREN SHOULD BE KEPT AWAY.
SELECTING THE MAIN OVEN SINGLE GRILL
SELECTING THE SINGLE GRILL
Scroll through the main oven function selections
using
or
illuminated.
Wait 5 seconds until your choice is confirmed and
the neon stops flashing.
The temperature will automatically set to 250°C
If you wish to alter the set temperature you may
do so by pressing
temperature setting is reached.
THINGS TO NOTE
1. The cooling fan for the controls will operate in
conjunction with the grill. It may run on after the
controls are switched off, until the appliance has
cooled.
See page 4 for more details on the
operation of the cooling fan.
2. The outer element may appear to glow slightly
brighter than the inner element.
normal.
3. Some smoke from fat splashes may be evident as
the grill cleans itself.
until the Single grill neon is
or
until the required
This is quite
USING
THE
(WHERE FITTED)
1. Ensure the telescopic runners are pushed back
into the oven cavity before fitting the shelf.
2. Holding the front edge of the shelf with both hands,
place the rear shelf forms over the telescopic
runners.
3. Slide the shelf into position, lifting slightly at the
front so that the shelf locates into the retaining
hooks.
To remove, raise the front edge and withdraw the
shelf.
RETAINING
HOOK
Ensure the shelf is positively located before using.
Note
Should you wish to purchase a telescopic runner kit,
this can be ordered from your local AEG Service
Centre by quoting part number (BAZD01)
948341000.
21
TELESCOPIC
RUNNERS
Advertisement
Table of Contents
