Table of Contents
Advertisement
Preparation for installation
AA
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
Pattern sheet
Insulation cover
Flexible hose
Deciding on where to install the indoor unit
Indoor unit
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
• If you install the cassette or duct type indoor unit on the ceiling with temperature over 27°C or humidity over 80%,you
must apply extra 10mm of polyethylene foam or other insulation with similar material on the body of the indoor unit.
CAUTION
Space requirements for indoor unit
16 English
Insulation cover
pipe A
pipe B
Cable-tie
user & installation
manual
Insulation drain
Flexible hose clamp
Advertisement
Table of Contents
Troubleshooting
