Table of Contents
Advertisement
Preparation for installation
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
Insulation cover
Insulation pipe
band
Deciding on where to install the indoor unit
Indoor unit
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
• If you install the cassette type indoor unit on the ceiling with humidity over 80%, you must apply extra 10mm of
polyethylene foam or other insulation with similar material on the body of the indoor unit.
Space requirements for indoor unit
4
Cable-tie
Drain hose
Installation
Clamp
manual
Advertisement
Table of Contents
