Table of Contents
Advertisement
Preparation for installation
Accessories in the indoor unit case
MH✴✴✴FMBA
Pattern sheet
Flexible hose
Safety net
Deciding on where to install the indoor unit
Indoor unit
f There must be no obstacles near the air inlet and outlet.
f
f Install the indoor unit on a ceiling that can support its weight.
f
f Choose a position that enables the piping and cables to be easily connected to the outdoor unit and the recommended
f
length of 7.5 metres(295.27 inch) to be respected.
f Leave enough clearance beneath the indoor unit to enable the filters to be removed without hindrance.
f
f Maintain sufficient clearance around the indoor unit.
f
f Make sure that the water dripping from the drain hose runs away correctly and safely.
f
f The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
f
• You have just purchased a Free Joint Multi air conditioner and it has been installed by your installation specialist.
• This device must be installed according to the national electrical rules.
CAUTION
• Max input power & current is measured according to IEC standard and input power & current is measured according
to ISO standard.
6
FJM IDU-PH_Cassette type_IM_31595A-04_EN.indd 6
Insulation cover band
Insulation pipe
M4x12 tapped screw
Pad stopper
M4x12 tapped screw
Insulation drain hose
Cable-tie
Installation manual
2015-11-16 오후 4:52:20
Advertisement
Table of Contents
