Table of Contents
Advertisement
Monitoring and Controlling
Item
DHCP
Select the Enabled check box to use DHCP. You cannot
enter an IP address if DHCP is enabled.
IP Address
Enter the IP address to assign to the currently connected
projector.
Enter a subnet mask for the currently connected
Subnet Mask
projector.
Default Gateway
Enter the gateway address for the currently connected
projector.
Send
Click this button to confirm the changes made to the
Projector.
C
Admin Password
Select the Enabled check box to require a password to open the Tools window.
The following items can be set.
Item
New Password
Enter the new password when changing the password to
open the Tools window. (The name can contain up to 26
single-byte alphanumeric characters.)
Confirm
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
Send
Click this button to confirm the changes made to the
Admin Password.
D
User Password
Select the Enabled check box to require a password to open the operation window
on the computer.
The following items can be set.
Function
Function
Item
New Password
Enter the new password when changing the password to
open the operation window. (The name can contain up
to 26 single-byte alphanumeric characters.)
Confirm
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
Send
Click this button to confirm the changes made to the
User Password.
205
Function
Advertisement
Table of Contents
