Epson V11H735140 User Manual page 92

Multi-Projection Function
d
Select the projectors that will be used for tiling, and then press the
[ ] button.
(1) Select the projectors you want to use to enter a checkmark.
Select Refresh to update the list. Select Sort to sort the projector order.
(2)
Select Set, and then press the [
e
Select Tiling, and then press the [
f
Select Tiling. Select Auto, and then press the [Esc] button.
] button.
] button.
g
Select Location Setup, and then press the [
The image is positioned automatically.
When the message "Assign IDs to projectors that have been located.
Do you want to continue?" is displayed, select Yes.
When setup is complete, the following screen is displayed.
a
If the image is not located correctly, select Manual in step 6,
and then follow the steps below to locate the image manually.
(1) Set Row and Column in Layout.
(2) Select Set, and then press the [
(3) Select the location in Location Setup, and then press the [
button.
(4) Repeat step (3) to reposition the location of all projectors.
(5) Select Set, and then press the [
h
Input the image signal to display the image.
"Automatically Detecting Input Signals and Changing the
s
Projected Image (Source Search)"
92
] button.
] button.
]
] button.
p.59