Table of Contents
Advertisement
User's Guide
Sending Faxes at a Specified Time (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1. Place the originals.
2. Enter Fax from the home screen.
3. Specify the recipient.
4. Press Menu, and then select Send Fax Later.
5. Press On, enter the time to send the fax, and then press OK.
6. Press Menu, select Fax Send Settings, and then make settings such as the resolution and the sending method
as necessary.
x
7. Press the
button.
Note:
To cancel the fax, cancel it from Job Monitor in Status Menu.
Related Information
"Sending Faxes Using the Control Panel" on page 97
&
"Placing Originals" on page 48
&
"Fax Mode" on page 26
&
"Checking Fax Jobs" on page 111
&
Storing a Fax Without Specifying a Recipient (Store Fax Data)
You can store up to 100 pages of a single document in monochrome. This allows you to save the time spent
scanning the document when you need to send the same document frequently.
1. Place the originals.
2. Enter Fax from the home screen.
3. Press Menu, select Store Fax Data, and then enable the function.
4. Press Menu, select Fax Send Settings, and then make settings such as the resolution and the sending method
as necessary.
x
5. Press the
(B&W) button.
You can send the stored document from Job Monitor in Status Menu.
Related Information
"Sending Faxes Using the Control Panel" on page 97
&
"Placing Originals" on page 48
&
"Fax Mode" on page 26
&
Faxing
100
Advertisement
Table of Contents
